Serving Atlanta, Georgia & surrounding areas

Contractor checking deck joist layout and ledger connections on an Atlanta backyard deck

New Decks · Replacements · Repairs

Deck Contractor Atlanta

Build a new deck or replace an old one with a clear scope, code-minded craftsmanship, and materials that hold up in Atlanta heat, rain, and humidity.

✓New builds and replacements ✓Written project scope ✓Code-minded details ✓Atlanta climate planning

Structure before surface

Atlanta Deck Contractor with a practical, code-ready approach

Most homeowners who call us want a new deck built or an old one replaced. Deck Contractor Atlanta does both, and we start with the structure: ledger attachment, posts and footings, beam sizing, joist layout, and guard and stair safety. Then we plan the surface: board choice, fasteners, drainage and airflow, and how the deck meets doors and grade.

Atlanta weather is hard on exterior wood. Hot summers, frequent rain, and humidity can speed up rot and fastener corrosion if the framing is under-ventilated or if water sits against the ledger. We build with details that matter: proper flashing at the house connection, corrosion-resistant hardware, correct stair geometry, and rails that feel solid.

You will get a written scope that spells out what is being replaced, what stays, and what the finished deck includes. That makes it easier to compare bids and keeps the work on track once we start.

Deck ledger flashing, structural fasteners, and metal connectors at a house connection

Deck services

Our deck services

Deck Builders

New deck builds planned around your yard, your access points, and how you actually use the space. A clear build process from layout through final punch list.

Deck Installation

Professional installation of deck components with careful fastening, consistent spacing, and clean transitions at doors, steps, and trim. Built for stability and long wear.

Deck Construction

Structural deck construction with attention to posts, beams, joists, footings, and load paths. The framing is done right before anything else goes on top.

Custom Decks

Design-build planning for layouts, multi-level decks, picture framing, built-in seating, and outdoor living features. A good fit when your space needs more than a basic rectangle.

Wood Decks

Wood deck projects that balance budget, look, and maintenance expectations. We help you choose boards, fasteners, and finishes that fit how much upkeep you want.

Composite Decks

Capped composite and PVC boards on framing laid out for the product, with the fasteners, gapping, and ventilation each manufacturer calls for. A good fit when you want less upkeep.

Deck Replacement

Full tear-out and rebuild when the frame, ledger, or posts are past repairing, or a new surface over framing that still checks out. Demolition and haul-off are part of the scope.

Deck Repair

Targeted repairs for loose rails, soft boards, failing stairs, and framing issues. We focus on safety first, then match materials and finishes as closely as practical.

Railings & Stairs

New guard rails, handrails, and stair runs built to current height, spacing, and strength requirements, in wood, aluminum, cable, or composite, on new decks or existing ones.

Under-Deck Drainage

Trough and ceiling systems that catch water under a raised deck and send it to a downspout, so the patio or storage space below stays dry.

Above Ground Pool Decks

Freestanding decks set to your pool's height, with gated stairs and railings planned around pool barrier rules. Built in pressure-treated wood or composite.

Not sure which one you need?

Tell us what is going on with your deck. We will tell you whether it calls for a repair, a new surface, or a rebuild.

Call (470) 279-4199

Built around the conditions

What you get when you work with us

Structure-first design

We size footings, posts, beams, and joists for the height and span of your deck, and detail the ledger, stairs, and guards before anything is priced.

Clear scope before work starts

You get a written plan that calls out framing, surface boards, rails, stairs, and any removals or haul-off, so the project is easy to understand.

Materials that fit the site

We consider sun exposure, drainage, and ventilation under the deck. Those details decide whether wood lasts and whether fasteners and connectors stay sound.

Clean, careful jobsite

We protect nearby landscaping where possible, keep walk paths usable, and leave the area tidy at the end of each day.

Straight advice on replacing an old deck

If your existing frame can take a new surface, we will tell you. If it cannot, we will explain what has to be rebuilt and why.

Professional deck crew on a completed residential deck in Atlanta

Local deck specialists

About Deck Contractor Atlanta

Deck Contractor Atlanta is a local Atlanta team focused on building and replacing decks that feel solid underfoot and make sense for how you use your backyard. Our work centers on the structural parts that matter most: correct connections, proper support, stable stairs, and rails that meet real-world use.

Homeowners usually call us when they want a new outdoor space, when the old deck starts to feel unsafe, or when boards are failing and they want something easier to maintain. We keep the process simple. We listen to what you want the deck to do, review the existing conditions, and provide a straightforward scope so you know what is included.

If you are comparing contractors, look for someone who will talk plainly about structure, water management, and code requirements. That is how you avoid repeat repairs and get a deck you can enjoy for years.

For more on how we scope and run a job, see what to expect from our Atlanta deck company.

Planning your investment

How much does a deck project cost in Atlanta?

Most new deck builds in Atlanta fall between about $6,000 and $25,000+, with small wood platforms starting lower and large custom or multi-level builds running higher. A full replacement is priced like a new deck plus demolition. Repairs are a smaller category: about $350 to $1,500 for small fixes and $1,500 to $6,500+ for structural work.

Your final price changes with square footage, framing condition, material choice (pressure treated wood, hardwoods, or composites), stairs and rail complexity, height off grade, and access for demolition and hauling. Your price is set after a site visit and a written scope.

Call (470) 279-4199

From inspection to walkthrough

How your deck project runs

  1. 01

    Site visit and assessment

    We review the existing deck or the build location, check structure and drainage, and talk through how you want to use the space.

  2. 02

    Written scope and options

    You get a clear plan with the key build details, material options, and what is included for stairs, rails, and any repairs to framing.

  3. 03

    Build

    We complete demolition as needed, handle framing and structural connections, then install decking, stairs, and guards with clean finish work.

  4. 04

    Final walkthrough

    We walk the deck with you, check rails and steps, confirm finish details, and address punch list items before closing out.

Planning a new deck or replacing an old one? Start with a site visit.

Call (470) 279-4199

Local property context

Where we build in and around Atlanta

We build across Atlanta and nearby cities. Each area has its own housing, lots, and permit office:

  • Southwest Atlanta: Wooded Cascade lots and older West End bungalows, with City of Atlanta permits and historic review where it applies.
  • Buckhead: Steep, wooded lots where the deck sits well above the yard and footings have to work around large trees.
  • Sandy Springs: Elevated decks off homes with tall back doors, planned around creeks and the Chattahoochee corridor.
  • Dunwoody: Mostly replacements of aging decks on established subdivision homes. The city permits a replacement like a new deck.
  • Brookhaven: Low decks on older ranches and tighter decks on infill homes, sized to the city's lot coverage limits.
  • Vinings: Hillside homes and townhomes under Cobb County rules, often with an HOA review.
  • East Atlanta: Small decks for bungalows and Victorians on narrow lots, from Virginia-Highland to Grant Park.
  • College Park & South Fulton: Two cities share these zip codes, so we confirm which one permits your address.
  • Westside Atlanta: Mill houses, renovated homes, and hillside lots near the Chattahoochee.
  • North Druid Hills & Northlake: Ranch homes on wooded lots in unincorporated DeKalb County.
  • Chamblee: Mid-century ranches and newer infill, with city limits on stream setbacks and lot coverage.
  • East Point: Replacements on older and mid-century homes, with city plan review and footing and framing inspections.

Project details

The details that make a deck last

Finished pressure-treated wood deck with clean railing lines and consistent board spacing
Close-up of deck stair tread installation, riser spacing, stringers, and fastened boards
Contractor measuring deck post locations with string lines and a level
Before-and-after view of a worn deck replaced with new boards and a rebuilt stair section

Common questions

Deck contractor FAQs

Do you help with permits and code requirements for deck work in Atlanta?

Yes. We build to code and guide you through the permitting process when your project needs a permit. During the site visit we will explain what typically triggers permit needs, like structural changes, new builds, or major stair and guard modifications.

How do I know if my deck needs repair or a full rebuild?

A deck usually makes sense to repair when the framing is sound and issues are limited to boards, rails, or localized sections. If the ledger connection, posts, beams, or joists show significant rot, movement, or improper attachment, rebuilding the structure is often the safer choice.

Can you replace deck boards without replacing the framing?

Yes, if the joists and beams are in good condition and properly spaced and supported, we can re-deck the surface and address rails or stairs at the same time. We confirm framing health first so new boards are not installed over compromised structure.

What materials do you install for decks in Atlanta, GA?

We install common deck materials including pressure-treated lumber, naturally durable woods, and composite decking. We will recommend options based on sun exposure, moisture, expected maintenance, and the look you want.

How soon can you start a project?

Start timing depends on season, material lead times, and whether permitting is required. After we review your project, we can give a realistic schedule window and outline the steps that happen before work begins.

Do you fix loose railings and unsafe stairs as a stand-alone job?

Yes, we take on safety repairs like loose guards, wobbly posts, damaged stair treads, and handrail issues. If we find a deeper structural cause, we will document it and recommend the proper fix instead of a temporary patch.

Service area

Our Atlanta service area

We build, replace, and repair decks across Atlanta and the nearby cities listed above.

Plan the right next step

Get a clear plan for your deck project

Tell us what you want to build or replace. We will review the site, talk through layout and material options, and provide a written scope you can trust.